Phosphate Hydraulic Injection Pump
$2002≥1Set/Sets
Payment Type: | L/C,T/T |
Incoterm: | FOB,CFR,CIF |
Min. Order: | 1 Set/Sets |
Transportation: | Ocean,Air |
Mechanical Diaphragm Dosing Pump
Hydraulic Diaphragm Metering Pump
$2002≥1Set/Sets
Payment Type: | L/C,T/T |
Incoterm: | FOB,CFR,CIF |
Min. Order: | 1 Set/Sets |
Transportation: | Ocean,Air |
Model No.: JYMZ-800/5
Brand: AILIPU
Material: Cast Iron
Power: Electric
Valve Body Type: Direct Single-Seat
Function: Electronic Type
Liquid Media: Viton
Performance: No Blocking
Voltage: 380V
Color: Green
Warranty: 12 Months
Certificate: CE Certificate
Type: Diaphragm
Feature: High Efficiency
Pump Body Material: Cast Iron
Pump Head Material: Stainless Steel
Keywords: Hydraulic Pump
Model: JYMZ-800/5
Selling Units | : | Set/Sets |
Package Type | : | Strong wooden packing suitable for the long ditance transportation |
In order to avoid the leakage, or prevent chemical which is dangerous, corrosive, toxic, the hydraulic pumps can be used for metering. The Hydraulic Diaphragm Metering Pump transmits and repeats the compression motion, this motion change the volume of the chamber in the pump head, then the dosed chemical liquid goes through the inlet valve and released via the outlet valve during the compression motor.
Meanwhile, it can also transfer some suspending liquid. In order to prevent the accidents caused by the mix of the media and hydraulic oil, or in terms of some liquid which are combustible, explosive, toxic and valuable, the double diaphragm hydraulic metering pumps with the alarm functions for the repture of diaphragms can be applied.
** Hydraulic actuated Diaphragm Metering Pump, no leakage
** Inner changeable release Safety Valve and limited auto-compensation valve
** Material of diaphragm: PTFE. Metal is available
** Control: manual control the stroke, stroke actuator
manual adjustment of stroke length
stroke actuator (DCK stroke Controller)
** Diaphragm rupture detection system is available
** Double or triple heads is available
| | | | | | | (MM) | (kg) |
□JYMZ-□/32 | 10 | 32 | 12 | 32 | 120 | 1.5 | 10 | 150 |
□JYMZ-□/16 | 16 | 16 | 0.75 | |||||
□JYMZ-□/25 | 20 | 25 | 14 | 1.5 | ||||
□JYMZ-□/10 | 26 | 10 | 0.75 | |||||
□JYMZ-□/20 | 32 | 20 | 16 | 1.5 | 15 | |||
□JYMZ-□/10 | 38 | 10 | 0.75 | |||||
□JYMZ-□/16 | 46 | 16 | 18 | 1.5 | ||||
□JYMZ-□/8 | 50 | 8 | 0.75 | |||||
□JYMZ-□/13 | 58 | 13 | 20 | 1.5 | ||||
□JYMZ-□/6.3 | 60 | 6.3 | 0.75 | |||||
□JYMZ-□/10 | 70 | 10 | 22 | 1.5 | ||||
□JYMZ-□/5 | 75 | 5 | 0.75 | |||||
□JYMZ-□/8 | 100 | 8 | 25 | 1.5 | ||||
□JYMZ-□/4 | 100 | 4 | 0.75 | |||||
□JYMZ-□/6.3 | 125 | 6.3 | 28 | 1.5 | ||||
□JYMZ-□/3.2 | 125 | 3.2 | 0.75 | |||||
□JYMZ-□/5 | 160 | 5 | 32 | 1.5 | 20 | |||
□JYMZ-□/2.5 | 160 | 2.5 | 0.75 | |||||
□JYMZ-□/4 | 200 | 4 | 35 | 1.5 | ||||
□JYMZ-□/2.0 | 200 | 2.0 | 0.75 | |||||
□JYMZ-□/3.2 | 250 | 3.2 | 40 | 1.5 | ||||
□JYMZ-□/1.6 | 250 | 1.6 | 0.75 | |||||
□JYMZ-□/2.5 | 320 | 2.5 | 45 | 1.5 | ||||
□JYMZ-□/1.3 | 320 | 1.3 | 0.75 | |||||
□JYMZ-□/2.0 | 400 | 2.0 | 50 | 1.5 | 25 | |||
□JYMZ-□/1 | 400 | 1 | 0.75 | |||||
□JYMZ-□/1.6 | 500 | 1.6 | 55 | 1.5 | ||||
□JYMZ-□/0.8 | 500 | 0.8 | 0.75 | |||||
□JYMZ-□/1.3 | 600 | 1.3 | 60 | 1.5 | ||||
□JYMZ-□/0.63 | 600 | 0.63 | 0.75 | |||||
□JYMZ-□/1.0 | 800 | 1.0 | 70 | 1.5 | ||||
□JYMZ-□/0.5 | 800 | 0.5 | 0.75 | |||||
□JYMZ-□/0.9 | 900 | 0.9 | 75 | 1.5 | ||||
□JYMZ-□/0.45 | 900 | 0.45 | 0.75 | |||||
□JYMZ-□/0.8 | 1000 | 0.8 | 80 | 1.5 | ||||
□JYMZ-□/0.4 | 1000 | 0.4 | 0.75 | |||||
□JYMZ-□/0.63 | 120 | 0.63 | 85 | 1.5 | 32 | |||
□JYMZ-□/0.32 | 120 | 0.32 | 0.75 | |||||
□JYMZ-□/0.5 | 1500 | 0.5 | 95 | 1.5 |
Notes
According to the tolerance range of the plunger pump, discharge pressure can be extended to 80 MPA, but the flow specifications will change accordingly
** The capacity up to 1200 LPH
** The maximum pressure up to 250 bar
** The maximum viscosity is 2000cp
** The flow can be adjusted from 0 ~ 100% while is running or stopped
** Motor: Standard 220V/50Hz, 380/50HZ
** Manual adjustment of the stroke
**Digital Controller(accepts 4~20mA signal to adjust the motor speed to control the output)
A: We are factory, and our factory has the independent research and development capacity
A: Generally it is 3 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
A: Yes, we could offer sample but it must be paid
A:TT, LC. etc.....
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.